Are you looking for an amazing, pre-painted and strong solution for your fencing project?
- Available in a range of attractive colours
- Made from New Zealand Colorsteel
- Strong and durable and built for New Zealand conditions
- Can be installed on almost any fence line
- Gates and Automation available
Colour Range – Click For Photos
Ebony Black
Ironsand
Grey Friars
Mist Green
Titania
Wont warp and twist like other fences do!
Have the comfort of a 10 year guarantee along with assurance that your fence will stand the test of time.
When compared with timber your Coloursteel fence will out last timber many times over!
Made from NZ Sourced Colorsteel. We don’t use low quality steel from overseas.
Manufactured from double sided 0.35BMT G550 COLORSTEEL® ENDURA®.
Single Gates
Standard Sizes: 1.2m, 1.5m, 1.8m high by 800 wide.
Posts: 65mmx65mmx3mm. Powdercoated steel.
Hardware Options: Standard D Latch, Pull top Latches (1.2 and 1.5), Double Sided Lockable Latch.
Double Gates
Standard Sizes: 1.2m, 1.5m, 1.8m high up to 1.5m wide per leaf. Total 3m opening.
Posts: 65mmx65mmx3mm. Powdercoated steel.
Hardware Options: Standard D Latch, Pull top Latches (1.2 and 1.5), Double Sided Lockable Latch. Drop Bolts. Automation available.
Sliding Gates
Standard Sizes: 1.2m, 1.5m, 1.8m high. Up to 6m wide.
Posts: 65mmx65mmx3mm. Powdercoated steel.
Hardware Options: Standard D Latch, Pull top Latches (1.2 and 1.5), Double Sided Lockable Latch. Automation available.
Installed in a range of profiles
Fence Heights
1200mm High, 1500mm High, 1800mm High, 2100mm High
Post spacing
Installed with a standard post spacing of 2.4m.
Fence gap
Installed with a standard 50mm gap under the fence but can be installed up to 100mm. If gap exceeds 100mm then the bottom of the fence will need to be cut on a slope.
Profiles (see image)
- Flat top and bottom.
- Stepped top and bottom
- Stepped top and sloped bottom
- Retaining Options up to 400mm high.
